2 measurement configurations (2 characteristics)

Different display modes with 1 or 2 measurements, with or without tolerances

Tolerance limits and control limits (Warnings)

Absolute or relative measurement

Direct or dynamic measurement (Min, Max, Max-Min , Average, Median)

USB communication "virtual keyboard"

Modbus-RTU or ASCII Communication on RS232

Sorting by classes of size, up to 16 classes by characteristic

Possibility to connect an optional I/O module with 8 optocoupled I/O

Possibility to connect a multi-function footswitch (measurement transfer, calibration etc...)

Optional external module for temperature compensation from PT100 sensor or Type K thermocouple

Easy to use and reliable

Tolerance limits, Control limits (warnings) Dimension of the master piece (reference piece)

Calculation formula (C1, C2, -C1, -C2, C1+C2, C1-C2, -C1+C2, -C1-C2, 3 points diameter)

Calibration

Different display modes with 1 or 2 characteristics displayed

Direct or dynamic measurement (Max, Min, Max-Min, Average, Median)

Absolute or relative measurement

Sorting by classes of size, up to 16 classes by characteristic

Measurement direction inversion

Possibility to lock selected functions with a password

Display resolution (from 2 to 5 decimals)

M-Bus connector for the optional connection of a module with 8 input/outputs (go, nogo, preset, send measurement etc...)

Metric (µm or mm) or imperial measurements (inches)

Selection between 2 measurement configurations (2 characteristics)

Automatic change of program by moving the probes

Different languages installed. New language can be installed upon request