From Strength To Strength
As CMMs get larger, it is not simply a case of scaling up the design of smaller models. Stiffness of the structure is critical, but weight must also be kept to a minimum. The Azimuth CMM is not only Aberlink’s largest in their range of CMM products, but it is the culmination of over twenty years experience and excellence in the design and manufacture of innovative metrology equipment incorporating the very latest materials technology.
Sizeable Performance
The revolutionary bridge of the Azimuth incorporates aluminium honeycomb sheets developed for use in Formula One and the aerospace industry. The remarkable stiffness to weight ratio that this provides gives the Azimuth an edge in both performance and speed. For a machine of this size, the Azimuth is not only fast, but extremely accurate. The drive systems designed for the Azimuth offer simplicity and reliability and the novel system used on the Y axis ensures that there is no degradation of performance across the full range of machine sizes offered up to 3m.
Fully Loaded
A big machine should also be able to measure a heavy component and this is another area where Aberlink has applied innovative thinking. Rather than simply increasing the depth of the granite table, which adds huge cost and weight to the machine, we offer a specially designed load plate to sit on the granite base. This plate can accept up to a six tonne load which will then be transmitted directly through the feet of the machine bench directly to the floor, meaning no loss of metrology performance whatsoever.
Making Measurement Easy
Every Aberlink CMM is supplied with the industry standard Aberlink 3D measurement software. World renowned for its easy-to-use, yet powerful interface, Aberlink is the only leading CMM manufacturer to offer zero-cost annual software maintenance contracts or subscriptions and free software updates, including all major releases. This means cost of ownership is very low and ensuring rapid ROI.
Starting from:
£
66,995.00
ex VAT
Product Overview
| Axis Travel (mm) | X 1200 | Y 2000, 3000 | Z 1000 |
| Overall Size (mm) | X 1940 | Y 3000, 4000 | Z 3595 |
| Motion | CNC |
| Structure | Bridge |
| Suitable for | Inspection Room |
| Drive Type | Belt |
| Volumetric Accuracy | TP20 (2.9 + L/250)µm | TP200 (2.8 + L/250)µm | SP25M (2.6 + L/250)µm |
| Scale Resolution | 0.1µm |
| Optimum Temp Range | 18 - 22°C |
| Operational Temp Range | 5 - 45°C |
| Table Construction | Solid Granite |
| Table Load Capacity | 1500kg |
| Max. Velocity Vector | 600mm/sec |
| Max. Acceleration Vector | 600mm/sec² |
| Air Required | Yes |
| Air Consumption | 100 l/min (3.53 cfm) |
| Required Air Pressure | 7 bar (100 psi) |
| Aberlink Camera Support | Yes |
Everything you need to start measuring from day one.
Find out more about the Aberlink Azimuth CNC CMM
info@ecggauging.co.uk
Phone
+44 (0)1452 545563
Address
Unit 3, St James Court, 285 Barton Street, Gloucester, GL1 4JE